Preventing Fire Damage in the Kitchen

The kitchen is one of the most dangerous rooms in your house as it contains many hazards and a high potential for unintentional fires.

Frying Pans and Deep Fry Pans

Using a thermostat controlled fryer is a great way to prevent deep fry pans fires. Avoid fat and grease build up on the stove or pans because fat and grease can easily catch fire.

Oven and Stove

The oven and range must be cleaned often to prevent grease and food from catching fire. Be careful when you cook and keep pot handles away from the edge of the stove. Don't wear long sleeves that can hang over the stove and catch fire. Always look on the oven when it is on and don't forget to turn it off when not in use. Place flammable fabrics, such as towels, away from the gas or electric range. Be careful with flammable liquids such as cleaning materials.

Appliances

The most important safety rule for appliances is to use only appliances that have been tested and approved by a testing facility. Avoid overloading electrical outlets and check for worn or broken wiring on a regular basis. If you find defects be sure to make necessary repairs immediately. It is also very important to keep appliance cords on the counter to prevent them from, accidentally, being pulled down.

Microwave Ovens

A very common mistake regarding microwave ovens is the wrong assumption that items, heated in the microwave oven, are not as hot as items heated in a regular oven or a mini oven. Keep in mind that even though the container does not heat, the content does. Be sure all the vents are cleared of obstructions and that the microwave oven has an adequate clearance for air circulation. Never place aluminum foil or other metals in a microwave oven.

For more information visit www.RestorationSOS.com

Free guides are available.

About The Author
Jonathan Meyer is an editorial staff member of RestorationSOS, a leading restoration services provider for water and fire damages.
To learn more about water and fire damage restoration, visit http://restorationsos.com or call 1-877-767-2407.
jonathanm@restorationsos.com

Construction Site Safety Basics

Construction sites are extremely dangerous places to be in. Because of the kind of work involved, the construction workers face a very high risk of getting injured and are also prone to accidents. Moreover, the equipment that the workers wear to reduce the exposure to harmful chemicals and elements in itself can cause accidents because it tends to reduce their flexibility and restrict their movements. It is said that approximately two people die per week on construction sites across the country. Therefore it is very essential that people working on these kinds of sites follow some basic but important guidelines for their safety as well as the safety of others.

General Guidelines for Construction Site Safety

For reducing or preventing injuries and accidents at the construction site, you have to begin with removing the unsafe conditions that exist as well as reduce the number of unsafe acts that need to be performed. But it is not possible to completely eliminate any of these conditions, as many times it is not predictable. Site workers must be given adequate training on safety issues and must be made to understand how critical it is for each one of them to practice the safety guidelines during work. Steps must be taken in advance to ensure that accidents are prevented as much as possible and if any hazardous situation arises, immediate steps must be taken to combat the situation and make sure that it does not does recur.

Some of the areas where you can practice safety guidelines are as follows:

Safety Around Electrical Equipment

It is critical that all workers know the most danger prone areas before they start working. Since chances for getting electrical shocks are high, care must be taken to prevent it. It is essential for workers to wear rubber gloves and boots, which are insulated. Electrical wiring should not be strung across the work areas and water should not be allowed to accumulate and form puddles in these areas. It is good to treat all electrical equipment as energized until tested and found not to be so.

Scaling Equipment

Ladders should always be checked and maintained in good condition. If it is defective, it should be discarded immediately or marked such that no one will use it by mistake in the work place. The ladder rungs must be kept clean with no traces of oil and grease. Before use, they must be secured properly so that it does not get displaced while a worker is using it.

In a similar way, maintenance of scaffolding is also very important. Only under supervision must scaffolding be set up or dismantled. Fall protection should be provided at all times and employees should wear harnesses while working at heights.

Avoiding Falls

Ensure that debris is not left lying around in the construction site. Also, any equipment that is used during work should be careful stored away after use and not left as it is, as workers might trip or slip on this equipment. Safety harnesses should always be worn if a worker is working at a height, as this is one of the main reasons for death during construction. A person competent to assess the situation and see if any hazards exist should inspect all anchorage points on a regular basis.

Proper Lighting

Lighting is crucial when working inside a closed area, but especially working at night. The rate of construction site accidents skyrockets when working at night due to insufficient lighting. Proper lighting may include floodlights, barricade lights and especially lights on head gear.

Closed Spaces

And finally, when working in closed and confined spaces like pits and trenches, it is good to have one standby person who will have no other duties other than to watch the workers on the inside and act or rescue in case of emergencies.

By following these simple guidelines, life on a construction site can become safer and the risk of accidents can be reduced.

About The Author
Lydia Quinn writes for Brandon Safety Lights, a leading provider of barricade lights and accessories. Visit us at: http://www.brandonsafetylights.com/.

Chainsaw Manufacturers Have Excellent Safety Records

Chainsaw manufacturers have excellent safety videos available. Always make sure you check safety features such as chain brakes, safety chains, and deadman switches. Chainsaws provide all the convenience of a Chainsaw, even in enclosed areas and near residential buildings. Make sure to service your systems chainsaw will help ensure that your equipment will not let you down.

Correct chain tension proper lubrication and a properly tuned engine. Your new chain if possible, soak the chain in oil to allow oil to penetrate all chain components, the chain tension should be checked and adjusted if needed before every use.

Before using your chainsaw each time you need to inspect the fuel system.After every 10 hours of use you need to clean or replace the air filter. Chainsaw two stroke engines a great power-to-weight ratio compared to many four-stroke engine designs.

The air intake filter tends to clog up with sawdust. The fuel filter should be replaced after every 20 hours of use. You'll acquire better chainsaw performance through basic maintenance, carburetor setting, and filing techniques. A vibration dampening system, which makes simple work of the most difficult tasks. These are merely tips to assist you while searching for a Chainsaw.

Chainsaws are easier to use than ever. Your chainsaw converts logs into lumber or timber. Before you use a chainsaw you should undergo extensive training, and only trained people should use a chainsaw, always think safety.

Suitable protective clothing suitable protective clothing should be worn - no matter how small the job.

Chainsaws produce a level of noise that will affect unprotected ears after only 15 minutes of exposure, wear ear muffs or ear plugs to keep as much noise as possible out.

About The Author
Jerry Smith can help you. Find out how thousands of people have been helped with the advice and information. Visit this link for details: http://www.find-chainsaws.com/buy-chainsaw.html.

Garage Door Opener Safety

Automatic garage door openers are such a convenience that they're practically standard in most garages today. Once upon a time, you could get rain soaked while you got out of your car to open the garage door to park. This modern day convenience has eliminated this scene from our landscape.

But along with the convenience, there are some issues to be aware of concerning your safety and security. If your home includes elderly folks or young children, some older garage doors can pose a risk. If your home is child free, you still need to concern yourself with any neighbor kids that you could be held liable for if an accident were to occur.

Newer overhead roll up garage doors feature pinch resistant or anti pinch panels. Without this feature small fingers could get injured if stuck in the gap between panels while the door is closing.

Garage doors and openers for the home are required to be compliant with Underwriters Laboratories spec 325, and have been since 1993. The UL325 spells out guidelines for a few other mechanisms like gates with automatic self closing equipment - but those are not required to meet UL325 like garage door openers are.

If you are thinking of selling your house, and you have an older garage door or opener, it might not meet UL325 specifications, and it will show up on the home inspection. Given the minimal cost of door openers, it might be a good idea to replace an older garage door opener before making contact with an agent. That will be one less obstacle to closing your home sale when the time comes.

Some of the main UL325 specifications are obvious and should be a good indicator of an garage door openers adherence to the spec. An electronic eye at the base of the door automatically cause the opener to reverses during the close cycle if object or person breaks the beam. A fragile person could be hit on the head by a closing door without this feature.

In some circumstances, an object can obstruct a door from closing even without interrupting the electronic beam. UL325 compliant door openers will automatically reverse if they sense excessive load on the closing mechanism, indicating an obstacle. This prevents the door from crushing down on an obstacle until something breaks.

To conclude, safety and security of a garage door are important considerations, not to mention possible realestate transaction liability. It might be more convenient to replace older doors and openers ahead of time. It's not expensive, and it keeps family and others safe.

About The Author
Scott Hares writes for http://steel-garage-door.com A free informational resource for anyone considering a new roll up overhead garage door.

DIY Ladder Safety Tips

In 2004 The United States department of Labor reported that the number of injuries and fatalities from falls from roofs and ladders had increased. This report focused on occupational injuries that generally occur among trained personnel, which speaks to an even greater safety concern over DIY projects utilizing ladders.

Most accidents occur from incorrect use of the ladder or materials. Before you begin a project make sure that you have gone through safety preparations and are familiar with the tools to be used. As in most DIY projects, the best safety precaution is to think out your task thoroughly before beginning. You should have confidence in both yours and your equipment's ability to complete the project.

Getting Started:

Once you have decided that you need to use a ladder to complete your project, make sure that you have the right type of ladder. There are many types of ladders all with their own advantages and disadvantages, which may include weight and height limits. If you are not sure that your ladder is the best fit for the job, make sure to consult a professional.

Some general things to look for in a ladder are:

How strong is it?
How tall is it?
Is it made primarily for indoor or outdoor use?
What material is it made out of (certain materials can have unique weaknesses or safety concerns)?
Does it have any cracks?
Does it have a coating such as paint that could cover defects?
Are the rungs secured?
Are the footpads secure and dry?

Diving into your Project:

While you may be eager to get started on your project, please take the time to ensure that your ladder is set-up correctly and that you know how to use it safely.

1. Make sure your ladder is steady. Place the ladder on a surface that is strong and level; also make sure that the ladder is not on top of any slippery materials.

2. If using a stepladder, make sure that the spreader arms are in the locked, open position.

3. If you are using a straight or extension ladder, make sure the ladder is resting at the correct angle to the wall or structure it is leaning on. The angle is normally 75-80 degrees. Or for every 4 ft high the ladder is on the wall, make the base 1 ft away from the bottom of the wall.

4. If using a straight or extension ladder, make sure that the top of the ladder is resting against a straight and solid surface.

5. Make sure that you have at least three points of contact with the ladder when working, such as two feet and one hand.

6. Wear flat shows or boots with grip when working on a ladder

7. Do not carry heavy items while climbing the ladder, use some type of hoist or pulley system to retrieve the items instead

8. Don't work on a ladder in strong wind

9. Don't allow children near the ladder

10. Never stand on the top two rungs of the ladder

11. Stay centered and facing the ladder when climbing or working

These ten tips will help keep you safe, however they are not all-inclusive. If you have any questions about your ladder or safety concerns about your project, make sure to consult an expert.

About The Author
Amanda Miller is a home repair and interior design expert. She has reviewed numerous home improvement tools such as little giant ladder systems.

Childproof Your Home to Keep Your Little One Safe

Parents and caregivers want to provide a safe place for their children to live and play but too often child proofing these areas gets put off. This has caused thousands of household accidents that could have easily have been prevented. The good news is that child proofing is not difficult and can easily be completed in one day.

It is important to protect your child from common household dangers before you bring your newborn home from the hospital. If you wait, things can become hectic and easily get put off until later. Below are some of tips on how to childproof your home.

On your first visit to the store you will likely be overwhelmed by all of the products on the market designed to child proof or baby proof your home. There are literally hundreds of different choices.

Some child proofing requires no devices, just common sense. Other areas definitely require the use of a child proofing device. Not all children are the same. If you feel a certain product would help protect your child from a situation they are more likely to get into, you may consider adding that to your arsenal as well.

Here are some basic steps for child proofing your home.

Move Cleaners, Medicine and Other Poisons

You need to move any poisonous substance out of the reach of your children. A common mistake is to keep cleaners under the kitchen sink or bath products on the ledge of the tub. While you might think that child resistant caps will protect your children, you should be aware that the requirements for a child resistant package may mean that at least 80-85% of children couldn't open them. That means your child might. All poisons and medicines should be stored in a high cupboard or locked area.

Block Stairways

Not surprisingly, falls are one of the biggest causes of injury to young children. Stairways are particularly dangerous and should always be properly gated. Never use pressure mounted gates at the tops of stairs since your child may be able to put enough pressure on them to give way.

Despite having a gate it is important for parents to keep a close eye on children around staircases. No safety device outweighs the importance of adult supervision.

Keep Children out of Dangerous Rooms

The bathroom, garage, and office can all be dangerous areas for you child. To keep them safe, use door-knob covers and door locks. Place a slide lock or hook-and-eye latch hign on the door, out of child's reach.

Keep Windows Safe

Lock windows or use guards to prevent them from opening too far. Screens will not keep your child from falling out of a window.

Make sure that blind cords are out of reach and the beds, cribs and other furniture are moved away from windows where a child could climb up and reach. You'd be surprised what they are capable of.

Outlets, Drawers and Cupboards

There is a huge assortment of products aimed at protecting your children's fingers from being caught in door hinges, slammed in drawers or by closing cupboard doors. Test out several products in a children's store that demonstrates how different products are used. The main purpose should be to prevent an accident but if you find the products difficult to use you may end up not using them at all.

Small Toys and Other Choking Hazards

Another major cause of hospital visits for small children is choking. Small toys, batteries, buttons, coins and other objects go straight into the mouths of babies and toddlers (and even some preschoolers). Prevention is the key. If you have older children they should be taught to keep small toys out of the reach of younger children. Keep a keen eye for objects on the floor where your baby is present.

Monitor New Dangers

You will need to be constantly aware of what your child can get access to. As you child grows and develops they may suddenly be capable of reaching or pulling down items you didn't think of.

Don't forget that most child proofing devices you can buy are temporary solutions to prevent the most disastrous accidents. Your children should also be taught how to behave and where to be especially careful. After all, your children will likely be in many homes that are not child proofed like yours and their safety will depend on understanding what's not safe.

Brought to You By: http://www.babynamebox.com

About The Author
Alli Ross is the hip granmamma at BabyNameBox.com, where you can find over 20,000 baby names and their meanings as well as parenting info and advice.
granmamma@babynamebox.com

DIY Ladder Safety Tips

In 2004 The United States department of Labor reported that the number of injuries and fatalities from falls from roofs and ladders had increased. This report focused on occupational injuries that generally occur among trained personnel, which speaks to an even greater safety concern over DIY projects utilizing ladders.

Most accidents occur from incorrect use of the ladder or materials. Before you begin a project make sure that you have gone through safety preparations and are familiar with the tools to be used. As in most DIY projects, the best safety precaution is to think out your task thoroughly before beginning. You should have confidence in both yours and your equipment’s ability to complete the project.

Getting Started:

Once you have decided that you need to use a ladder to complete your project, make sure that you have the right type of ladder. There are many types of ladders all with their own advantages and disadvantages, which may include weight and height limits. If you are not sure that your ladder is the best fit for the job, make sure to consult a professional.

Some general things to look for in a ladder are:

How strong is it?
How tall is it?
Is it made primarily for indoor or outdoor use?
What material is it made out of (certain materials can have unique weaknesses or safety concerns)?
Does it have any cracks?
Does it have a coating such as paint that could cover defects?
Are the rungs secured?
Are the footpads secure and dry?

Diving into your Project:

While you may be eager to get started on your project, please take the time to ensure that your ladder is set-up correctly and that you know how to use it safely.

1. Make sure your ladder is steady. Place the ladder on a surface that is strong and level; also make sure that the ladder is not on top of any slippery materials.

2. If using a stepladder, make sure that the spreader arms are in the locked, open position.

3. If you are using a straight or extension ladder, make sure the ladder is resting at the correct angle to the wall or structure it is leaning on. The angle is normally 75-80 degrees. Or for every 4 ft high the ladder is on the wall, make the base 1 ft away from the bottom of the wall.

4. If using a straight or extension ladder, make sure that the top of the ladder is resting against a straight and solid surface.

5. Make sure that you have at least three points of contact with the ladder when working, such as two feet and one hand.

6. Wear flat shows or boots with grip when working on a ladder

7. Do not carry heavy items while climbing the ladder, use some type of hoist or pulley system to retrieve the items instead

8. Don’t work on a ladder in strong wind

9. Don’t allow children near the ladder

10. Never stand on the top two rungs of the ladder

11. Stay centered and facing the ladder when climbing or working

These ten tips will help keep you safe, however they are not all-inclusive. If you have any questions about your ladder or safety concerns about your project, make sure to consult an expert.

About The Author
Amanda Miller is a home repair and interior design expert. She has reviewed numerous home improvement tools such as little giant ladder systems.

Poisons In The Home

As your baby starts to move around the house, it is extremely important that you protect her from the poisons routinely kept in the home. Here are some tips to help keep your child safe.

Go through what you have and throw out what you don’t need

Have an old box of lye around? You’re probably not ever going to use it, and it’s terribly dangerous, so get rid of it. Keep only the products you really use, so that there are fewer things to have to keep locked up.

Keep things locked up

Assemble all your cleaning supplies, and put them in locked cabinets. Don’t assume that putting them in a higher cabinet keeps your child safe. Sometimes babies seem to learn to climb overnight, so simply storing items on a higher shelf might not be enough.

Don’t store poisons in old food containers

Your baby will learn early on to recognize things like a juice container or baby food jar so don’t use empty ones to store hazardous products.

Throw empty containers away outside

Don’t put the empty bleach container in the kitchen trash can – rinse it and take it to the outside trash can immediately.

Check your plants

There are many common houseplants that are poisonous, including philodendron, English ivy, holly, mistletoe, and hyacinths, so it’s best to remove these or keep them well out of reach.

Some things you might not think of as poisonous

Your cosmetics, over the counter medicines, vitamins, and mothballs can all be poisonous, so keep these locked up or out of the way. Get used to reading labels, so that you can keep tabs on new things that come into the house.

If you’ve never had children before, keeping up with products that can be poisonous can be a challenge at first. But, take some time, preferably before the baby is born, to sort through your items and store them properly. Then, be diligent about buying the safest items you can. For instance, non-chlorine bleach is safer than chlorine. And, always look for child-proof caps on products you plan to buy. Learn to substitute. Did you know you can use olive oil to polish furniture and vinegar to clean your hardwood floors? These kinds of substitutions can make your home safer, and give you fewer items to look up. And, finally, don’t forget to post your local poison control phone number right by the phone. It could save your child’s life.

About The Author
Sarah Veda is a 41 year old wife and mother of two boys and one girl. She spent many years as a manager in the corporate world, and gave it up to be a stay at home mom. Go to http://www.infantresources.com now and get her incredible baby minicourse – absolutely free.

20 Safety Tips for Budget Travelers

1) When taking taxis from an airport to your hotel, travel in the more expensive airport taxis and ensure that the drivers have official identification. Never take a taxi waiting outside the airport grounds.

I know this sounds extreme, but it is by far better to be safe then sorry.

2) When traveling from your hotel to the airport, go with a taxi recommended by the hotel.

Again, taxi’s can be very dangerous. I can’t express that enough.

3) Try not to arrive in a new city or town late at night.

This can just go wrong in a number of ways. It is much easier getting checked in during the day time and security at night in certain areas is just horrendous.

4) Travel in a group if possible.

Since when is traveling in numbers not a good idea?

5) Learn the basics in the local language before you arrive. Don't expect that people will speak English.

English is becoming more widely spoken these days, but you want to be sure. You should always check on these things before your arrival.

6) Keep your valuables hidden.

A money belt is great if it is an option that you willing to look into. There are many different styles of money belt. One of the most popular is an “over the shoulder” style wallet on a strap that you were underneath your top. This makes it very difficult for a thief to make off with your valuables.

7) Avoid going on your own to remote areas/ruins where tourist would be expected to go. Seek local advice or take a guide.

8) Read the guide books and talk with other tourists to find out which areas are best avoided.

9) When leaving discos late at night take a taxi home no matter how close your hostel is. Outside most discos you'll find a street vendor selling cigarettes. Usually these people know all the taxi drivers and can recommend a safe one.

10) When arriving in a new town, keep to your original plan and stay in the hostel that you have decided on. Don't let the taxi driver persuade you that your hostel is fully booked and that he knows a cheaper and better one. He'll be working on commission and the hostel probably won't be in a safe part of town.

11) Even better, when arriving lane/train in a new city, try to reserve your hotel in advance, preferably with a hotel that has an airport/station collection service.

12) Don't wear expensive looking jewelry.

13) On public transport have your day pack close to you at all times, preferably with the straps around your legs or padlocked to the luggage rack. On buses your backpack will normally go outside, either on top of the roof or in the external luggage compartments. On long distance buses ask for a receipt for your bags. On short rides just keep a careful eye out each time the bus stops to off-load bags. In the event of having your bags stolen, stay with the bus - you will probably require a declaration from the bus company accepting responsibility for the loss in order to claim any money from your insurance company.

14) Leave your valuables in your hotel safe when making day trips or longer tours. Obtain a receipt not just for your money belt/wallet etc. but for its contents, with each item listed.

15) If you have to leave your passport and credits cards together, place the credit card in a sealed envelope and sign your name across the flap. This way when you return you will know that nothing has been tampered with.

16) If planning on going to market areas, crowded streets, fiestas etc. don't go with all your valuables. Leave them in the hotel. If you’re planning on buying something expensive keep your money safely in a money belt. Try to be discreet when opening it! To protect small change in your pockets you can stuff a handkerchief in after.

17) If the pavements are really crowded, especially in market areas, walk in the road.

18) If you suspect someone is following you, stop and stare them in the eye until they go. If you really get a bad feeling about a place, go with your first instincts and leave. Bag slashing is rare nowadays but for added safety you can wear your day pack on your chest.

19) If it's on your back try to walk without stopping. If you need to stop, sway your pack gently from side to side so that you can feel if anyone is tampering with it.

20) When putting your bag down on the floor, to take a photo or just to sit in a café, remember to put your foot through the strap. Not only will it be impossible to snatch, you also won't forget it! This is the most common type of theft - tourists forgetting bags in cafes and on returning to ask if anyone has seen it, you've guessed it, it's gone.

About The Author
Eric Odom is an avid backpacker who runs student travel websites for a living. His latest site can be found at http://www.backpackearth.com.

Baby Cribs Safety Checklist

Congratulations! You’ve got a baby on the way!

Once your baby has arrived, one of the most important parts of your new life together will be getting a good night’s sleep — you in your bed, the baby in a safe and comfortable crib. At first, you may want your newborn to sleep in a bassinet by your bed, making it a little easier for breastfeeding moms, but have a crib ready by the time your baby can roll over.

Your baby will spend more time in the crib than anywhere else, so safety is of utmost importance. What makes a crib safe?

* The bars or slats of the crib railing should be no more than 2-3/8" apart, close enough together to prevent your baby’s head from slipping through or getting stuck. That crib in the attic may be a beautiful antique, but it probably does not meet this safety standard. Secondhand older cribs may also have splinters or lead paint as well as slats that are too far apart.

* Cribs with cutout designs along the rail may look pretty, but your baby’s arm or neck could get stuck in them.

* The crib must be sturdy. Your child will sleep in a crib until it’s time to move into a regular bed between the ages of 2 and 3. When shopping for the crib, give it a good shake to see if it wobbles or rattles.

* Construction materials should be stained or painted hardwoods like maple, ash, beech or oak. The use of inferior woods can potentially weaken or warp the slats. Some metal cribs are also very sturdy and secure. All finish materials must be lead free and non-toxic.

* For safety, the dropsides must be at least 9" above the mattress support when lowered. When the side is raised, the top must be at least 26" above the support at its lowest position. You should have no trouble quietly raising and lowering the side rail easily with one hand, since chances are you’ll have a sleeping baby in your arms.

* Make things a little easier on your back by choosing a crib with an adjustable height mattress. A newborn can rest higher in the crib, while a baby who can sit up needs a lower mattress so he can’t climb out. You can change the height of most mattresses by simply raising or lowering the mattress support.

* Check the hardware on the crib for sharp edges or points or anything else that could hurt your baby.

* The mattress should fit snugly into the crib. If you can fit two fingers between the side of the mattress and the crib, it is too small. Keep an eye on foam mattresses; over time, they may break down at the edges and leave gaps. Check the mattress support to make sure there are safety clips that lock the hangers into their notches.

* Use nonflammable and hypoallergenic bumper padding attached to the inside railings of the crib to cushion all four sides and prevent your baby from sticking an arm or leg through the railings. Securely fasten the bumper pads to the sides of the crib in at least six places. Be sure to remove bumper pads when your baby becomes more active.

* Follow assembly instructions carefully. Periodically tighten all nuts, bolts, and screws and check teething rails for cracks. Check the mattress support hooks regularly.

* Don’t place a crib against a window, near curtains or drapery cords, or near furniture that could help your baby climb out.

* Crib toys need to be removed from the crib when baby is sleeping. And remove mobiles when baby is able to grab at objects.

Federal safety guidelines went into effect in 1973, but only since 1991 do most cribs meet all mandatory safety standards (16CFR part 1508) as set by The Consumer Products Safety Commission (CPSC) and the voluntary standards (ASTM F966 and F1169) as set by the American Society for Testing and Materials (ASTM). The Juvenile Products Manufacturers’ Association (JPMA) certifies cribs that meet the safety standards.

For more information on crib safety and other nursery equipment, contact the Consumer Products Safety Commission at 1-800-638-2772.

About The Author
Parvati Markus

When Parvati Markus is not writing helpful and insightful articles like the one you just read from www.homeandliving.com, she works with The Kabbalah Centre and freelances on non-fiction books and articles. As a recent arrival in L.A., Parvati is completing her “residency requirement” by writing a screenplay.

Find great home furniture online at www.homeandliving.com.
articles@homeandliving.com